Class WiFiServer
WiFiServer Class
Members
Public Constructors |
|
|---|---|
WiFiServer::WiFiServer |
Constructs a WiFiServer object and creates a server that listens for incoming connections on the specified port |
Public Methods |
|
WiFiServer::available |
Gets a client that is connected to the server and has data available for reading. The connection persists when the returned client object goes out of scope; you can close it by calling the client.stop() |
WiFiServer::begin |
Tells the server to begin listening for incoming connections |
WiFiServer::write |
Write data to all the clients connected to a server |
WiFiServer::WiFiServer
#include <WiFi.h>
char ssid[] = 「yourNetwork」; // your network SSID (name)
char pass[] = 「secretPassword」; // your network password
int keyIndex = 0; // your network key Index number (needed only for WEP)
int status = WL_IDLE_STATUS;
WiFiServer server(5000);
void setup() {
Serial.begin(9600); // initialize serial communication
pinMode(9, OUTPUT); // set the LED pin mode
// check for the presence of the shield:
if (WiFi.status() == WL_NO_SHIELD) {
Serial.println(「WiFi shield not present」);
while (true); // don’t continue
}
String fv = WiFi.firmwareVersion();
if ( fv != 「1.1.0」 )
Serial.println(「Please upgrade the firmware」);
// attempt to connect to Wifi network:
while ( status != WL_CONNECTED) {
Serial.print(「Attempting to connect to Network named: 「);
Serial.println(ssid); // print the network name (SSID);
// Connect to WPA/WPA2 network. Change this line if using open or WEP network:
status = WiFi.begin(ssid, pass);
// wait 10 seconds for connection:
delay(10000);
}
server.begin(); // start the tcp server on port 5000
printWifiStatus(); // you’re connected now, so print out the status
}
char buffer[256];
void loop() {
WiFiClient client = server.available();
while (client.connected()) {
memset(buffer, 0, 256);
int n = client.read((uint8_t*)(&buffer[0]), sizeof(buffer));
if (n > 0) {
for (int i=0; i<n; i++) {
Serial.print(buffer[i]);
}
n = client.write(buffer, n);
if (n <= 0) break;
}
}
client.stop();
}
void printWifiStatus() {
// print the SSID of the network you’re attached to:
Serial.print(「SSID: 「);
Serial.println(WiFi.SSID());
// print your WiFi shield’s IP address:
IPAddress ip = WiFi.localIP();
Serial.print(「IP Address: 「);
Serial.println(ip);
// print the received signal strength:
long rssi = WiFi.RSSI();
Serial.print(「signal strength (RSSI):」);
Serial.print(rssi);
Serial.println(」 dBm」);
}
WiFiServer::available
WiFiServer::begin
WiFiServer::write